Here’s where the problem of compatible ink cartridges creeps in. You’re barely using the three other colors. Print 377 pages of this image and your magenta ink cartridge will read as halfway-empty. Magenta is the primary color being used for this image. Let’s use an example with the above image showing of the two apples falling into water. (Black has a higher yield than the rest.) Print 377 pages and, in theory, your cartridge is half-empty. Cyan, magenta, and yellow have official yields of 755 pages. The cartridges are available in four standard colors: black, cyan, magenta, and yellow. Let’s say you own one of these models of Epson WorkForce printers:Īll these printers can use a single model of ink cartridge, the Epson 127. In the worst-case scenario, you could end up having an ink cartridge read as “empty” when it could actually be almost full. Any color print, no matter what color is really being used, triggers the page counter in all the color cartridges. The problem here is that the chips in the three other colors–black, cyan, and yellow–would also run as half-empty. If you were to print out 377 pages of that image (half the 127 cartridge’s total yield), you’d have a printer reading the compatible magenta cartridge as being half-empty. Magenta would be the primary color to print the image above. A printer will be equipped with colors black, cyan, magenta, and yellow. The Epson compatible 127 cartridge has a calculated yield of 755 pgs. Let’s illustrate this problem using Epson’s compatible 127 ink cartridges and the image above. Each page, regardless of how much ink is actually used, is based on a pre-programmed estimate. To tell the printer the cartridge’s model and colorĪ compatible cartridge’s chip uses a “page counter” to calculate the amount of ink is inside the cartridge this method is inaccurate because it estimates the amount of ink based on the number of pages it has printed on.Always store ink cartridges with the label facing up do not store cartridges upside-down.If you’re on the market to buy a remanufactured Epson ink cartridge, you should know that there are two types of such cartridges on the market, one based on a new chip and the other based on a reset chip. The valve in the ink supply port is designed to contain any excess ink, but do not touch the ink supply port or surrounding area. If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge.Ĭaution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the printer. ![]() Note: Do not turn off the printer during ink priming. Then close the cartridge cover and lower the scanner unit.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |